The dense microstructure of AZS33 # zirconium corundum brick makes the brick resistant to liquid glass erosion, and it is difficult to generate stones or other defects in the glass kiln. It is the most widely used product in glass kiln. It is mainly applicable to the upper structure of the melting tank, the pool wall tiles and paving tiles of the working pool, and the material channel.

 

AZS33 is the largest and most widely used tea in the AZS series of fused cast products. It has superior performance in preventing contamination of glass liquid. It is widely used in the walls, bottoms, superstructures and feed channels of glass furnaces.

 

Fused zircon corundum brick AZS36 #:

Except that it has the same eutectic body as AZS33 # Fused Zircon Corundum Brick, 36 # AZS Brick has more chain-locked zirconia crystals and lower glass phase content, so the corrosion resistance of 36 # Fused Zirconia Corundum Brick The property is further enhanced, so it is suitable for areas where the flow rate of glass liquid is fast or the temperature is high.

AZS36 s is an excellent product in the AZS series of fused cast products. It has high resistance to liquid glass erosion and low pollution. It is usually used in key parts such as the wall of the glass melting furnace near the hot spot of the melting furnace.

 

Fused zircon corundum brick AZS41 #:

AZS41 # Fused Zirconium Alumina Brick In addition to the eutectics of silica and alumina, it also contains more uniformly distributed zirconia crystals. In the zirconium alumina brick system, its corrosion resistance is the best. Therefore, the key parts of the glass kiln were selected so that the life of these parts was balanced with other parts.

 

AZS41 is the most excellent product in the AZS series of fused cast products. It has the characteristics of extremely high resistance to glass liquid erosion and extremely high glass phase exudation temperature, and the pollution to glass liquid is extremely low. It is widely used in key parts such as the pool wall, the corner of the feeding port, the flow hole, the kiln, the bubble at the bottom of the pool and the all-electric melting furnace at the hot spot of the glass kiln.